Concrete Driveways in Pembroke Pines, FL
A new concrete driveway in Pembroke Pines usually costs about $5 to $8 per sq ft for a plain broom finish, needs a city permit and takes about a week before you can drive on it. Call or request a quote and we'll connect you with a licensed local concrete contractor for a free on-site estimate.
Free estimates from independent, licensed local concrete contractors.
Why homeowners use this service
Free estimates
Request a free, no-obligation on-site estimate and written quote.
Local licensed pros
We connect you with independent, licensed concrete contractors who work in Pembroke Pines.
Clear pricing ranges
Honest per-square-foot ranges and calculators so you can budget before anyone visits.
Planning a Driveway in Pembroke Pines
A driveway is one of the hardest-working surfaces on a Pembroke Pines property. It handles daily traffic, sits under direct sun for most of the year and takes the brunt of summer storms that can drop inches of rain in an afternoon. When it's built right, a concrete driveway can serve a household for decades. When it isn't, the problems show up quickly: puddles that never drain, cracks that keep widening and slabs that settle away from the garage.
This site helps Pembroke Pines homeowners plan driveway projects with realistic expectations and then get connected with independent, licensed local concrete contractors for a free on-site estimate. Below you'll find the types of driveway work available, what makes concrete hold up in South Florida, how the process works and answers to the questions homeowners ask most.
Concrete Driveway Contractors and Services in Pembroke Pines
New Concrete Driveway Installation
New driveways built on a compacted base with proper slope, joints and a broom finish.
Installation in Pembroke Pines →
Driveway Tear-Out & Replacement
Remove a cracked, sunken or root-damaged driveway and pour a new one.
Replacement in Pembroke Pines →
Stamped & Decorative Concrete
Stamped patterns, color, stain, charcoal finishes and exposed aggregate.
Stamped in Pembroke Pines →
Driveway Extensions & Widening
Add parking space, widen a driveway or rebuild the apron.
Extensions in Pembroke Pines →
Why Concrete Works Well in South Florida Heat and Heavy Rain
Concrete is a natural fit for Pembroke Pines. It doesn't soften in the heat the way asphalt can, it reflects more sunlight so it stays cooler underfoot, and it holds up to cars parked in the same spot every day. But the climate also punishes shortcuts:
Drainage slope
Summer storms in Broward County are intense and the ground is flat. A driveway should slope water away from the house toward the street or swale. A common guideline is a slope of roughly 1% to 2% (about 1/8 to 1/4 inch per foot), which prevents standing water, mildew and water creeping under the garage door.
Broom finish for traction
Smooth concrete gets slippery when wet. A broom finish drags light grooves across the surface so tires and shoes keep their grip during afternoon downpours.
Sealing against UV and mildew
Intense UV, humidity and shade encourage fading, mildew and black staining. A quality sealer, applied after curing and renewed every few years, makes the surface easier to clean and slows discoloration.
Control joints
All concrete shrinks and cracks as it cures. Control joints tell those cracks where to go so they stay hidden in a neat line. For a 4-inch slab, joints are usually spaced roughly every 8 to 12 feet.
How It Works
Step 1
Call or request a quote
Tell us your ZIP, the type of project and your timing.
Step 2
Get matched with a local pro
We connect you with an independent, licensed contractor in Pembroke Pines.
Step 3
On-site estimate & permit
Your contractor measures, gives a written quote and typically handles the city permit.
Step 4
Prep and pour
Demolition if needed, base, forms, reinforcement, pour, finish, cure and inspections.
Driveway Styles and Ideas: Finish Options
Example photos of driveway styles for inspiration, not completed projects.
Plain broom finish
The South Florida standard: textured for traction in the rain, simple to seal and the most budget-friendly.
Stamped concrete
Patterns that mimic slate, stone or brick pressed into fresh concrete.
Colored & stained
Integral color, stains and charcoal tones for a custom look.
Exposed aggregate
A pebbled surface with excellent grip that hides dirt well.
Pavers
Concrete, brick or travertine units that can be lifted and relaid for repairs.
Permeable pavers
Open joints and a stone base let storm water soak in instead of pooling.
Estimate Your Pembroke Pines Driveway Cost
Plain broom-finish concrete runs about $5 to $8 per sq ft and stamped about $8 to $21 per sq ft. Try the calculator, then see the full concrete driveway cost guide.
Driveway Cost Calculator
Low estimate
$3,000
High estimate
$4,800
This is an estimated range. Your contractor will give a written quote.
These are general ranges only. Permits, HOA requirements, site conditions and design details can change the price.
What to Ask Any Contractor
- State license: Ask for the contractor's Florida license number and verify it with the state's licensing lookup.
- Insurance: Request proof of general liability and workers' compensation coverage.
- Permit handling: Confirm they will pull the City of Pembroke Pines permit and schedule inspections.
- Written quote: Get thickness, base, reinforcement, finish, demolition and cleanup in writing.
- Payment schedule: Agree on deposit and progress payments tied to completed work. Avoid paying everything up front.
Pembroke Pines Neighborhoods We Serve
- Silver Lakes
- Chapel Trail
- Pembroke Falls
- Pembroke Lakes
- Walnut Creek
- Century Village
- Towngate
ZIP codes: 33024, 33025, 33026, 33027, 33028, 33029
Many Pembroke Pines communities require HOA architectural approval for driveway changes. Start that application early.
See all service areas →Pembroke Pines Concrete Driveway FAQs
How much does a concrete driveway cost in Pembroke Pines?
As a general range, plain broom-finish concrete runs about $5 to $8 per square foot, and most standard installs fall between $6 and $16 per square foot depending on thickness, reinforcement and finish. Decorative or stamped concrete is roughly $8 to $21 per square foot. Removing an old driveway adds about $1 per square foot. Your contractor will give you a written quote.
Do I need a permit for a new driveway in Pembroke Pines?
Yes. The City of Pembroke Pines requires a permit for driveways, walkways and patios. Most licensed contractors pull the permit for the homeowner as part of the job.
Does my HOA need to approve a driveway change?
Many Pembroke Pines communities require architectural approval before you change a driveway's size, material or color. Check your HOA's guidelines and submit any required application before work is scheduled.
How long before I can drive on a new concrete driveway?
Typically you can walk on it after 24 to 48 hours and drive a passenger car on it after about 7 days. Concrete reaches its design strength at around 28 days, so avoid heavy trucks until then.
How thick should a driveway be?
Four inches is typical for cars and light trucks. Five to six inches is common where heavier vehicles, RVs or boat trailers will park.
Is concrete or pavers better in South Florida?
Both work well. Poured concrete usually costs less up front and needs little maintenance. Pavers cost more but are easy to repair section by section, and permeable pavers help with drainage during heavy rain.
How long does a driveway project take?
The pour itself is often one day, with demolition and forming a day or two before. Permitting, HOA approval and inspections usually take longer than the construction, so plan for a few weeks from first call to finished driveway.
Do you do the work yourselves?
No. We're a local resource that connects Pembroke Pines homeowners with independent, licensed concrete contractors. Your contractor provides the estimate, the written quote and the work.